AHB Clock control 0
| RESERVED | Reserved. Read value is undefined, only zero should be written. |
| ROM | Enables the clock for the Boot ROM. 0 = Disable; 1 = Enable. |
| RESERVED | Reserved. Read value is undefined, only zero should be written. |
| SRAM1 | Enables the clock for SRAM1. 0 = Disable; 1 = Enable. |
| SRAM2 | Enables the clock for SRAM2. 0 = Disable; 1 = Enable. |
| RESERVED | Reserved. Read value is undefined, only zero should be written. |
| FLASH | Enables the clock for the flash controller. 0 = Disable; 1 = Enable. |
| FMC | Enables the clock for the Flash accelerator. 0 = Disable; 1 = Enable. |
| RESERVED | Reserved. Read value is undefined, only zero should be written. |
| INPUTMUX | Enables the clock for the input muxes. 0 = Disable; 1 = Enable. |
| RESERVED | Reserved. Read value is undefined, only zero should be written. |
| IOCON | Enables the clock for the IOCON block. 0 = Disable; 1 = Enable. |
| GPIO0 | Enables the clock for the GPIO0 port registers. 0 = Disable; 1 = Enable. |
| GPIO1 | Enables the clock for the GPIO1 port registers. 0 = Disable; 1 = Enable. |
| RESERVED | Reserved. Read value is undefined, only zero should be written. |
| PINT | Enables the clock for the pin interrupt block.0 = Disable; 1 = Enable. |
| GINT | Enables the clock for the grouped pin interrupt block. 0 = Disable; 1 = Enable. |
| DMA | Enables the clock for the DMA controller. 0 = Disable; 1 = Enable. |
| CRC | Enables the clock for the CRC engine. 0 = Disable; 1 = Enable. |
| WWDT | Enables the clock for the Watchdog Timer. 0 = Disable; 1 = Enable. |
| RTC | Enables the clock for the RTC. 0 = Disable; 1 = Enable. |
| RESERVED | Reserved. Read value is undefined, only zero should be written. |
| MAILBOX | Enables the clock for the Mailbox. 0 = Disable; 1 = Enable. |
| ADC0 | Enables the clock for the ADC0 register interface. 0 = Disable; 1 = Enable. |
| RESERVED | Reserved. Read value is undefined, only zero should be written. |